|Minimum Order Quantity||1 Set|
|Capacity||1m2 to 40m2|
|Material||SS 316L , Duplex, SS 304|
|Usage/Application||Industrial Effluent, Waste Water, Dyes Industries, Paper Industries|
ATFD is stands for evaporation of water/solvents to make concentrated liquid to dry powder or flakes.
ATFD is the ideal apparatus for continuous processing of concentrated material to dry solids. ATFD is consist of cylindrical, vertical body with heating jacket and a rotor inside of the shell which is equipped with rows and pendulum blades all over the length of the dryer. The hinged blades spread the wet feed product in a thin film over the heated wall.
The turbulance increases as the product passes through the clearance before entering calming zone situated behind the blades as the heat will transfer from jacket to main shell under the smooth agitation water/solvent will evaporate and liquid will convert to slurry, to cake or to dry powder or flex.
The vapors produced rise upward, counter-curruentlyto the liquid and pass through Cyclone separator mounted of vapor outlet of ATFD.
Further these vapor will be condensed in condenser and recovered as condensate. System will be Operated under vacuum for temerature sensitive products and atmospheric condition for normal drying.
|Capacity||1000kg to 5000kg/hr|
Cage mill Flash Dryer :-
E& D Cage Mill Flash Dryer suitable to dry wet cake, Lumps and even Paste which is recover in Filter Press, Centrifuge and so on, with advanced technology, reasonable price, compact structure, large production capacity and energy efficiency. This Cage mill Flash Dryer can complete drying, lumps crushing and screening in a single step.
Material is directly fed from filter press to dryer
Less drying time hence less labour handling and quick production
Less electricity load
Space is 1/3 that of Spray dryer
Various product range
Energy consumption saving
Fuel consumption saving
Influence of heat on heat sensitive products is remarkably low even at high temperature
Lump breaker with variable speed feed screw feeder for non clogging of feed
Only two operators are required to operate the plant instead of number of labourers in conventional drying system
The environmental conditions remains clean
China Clay industry
Kaolin Clay industry
Cobalt Hydroxide industry
Carbonate Hydroxide industry
Copper Ore industry
1000kg to 5000kg/hr.
· 150°C to 250°C
|Max Temperature||600 degree|
|Material Grade||SS 304 / 316 / CS|
|Feed Rate Range||500kg/hr to 10000kg/hr|
|I Deal In||New Only|
*Your information is safe with us.
|Minimum Order Quantity||1 Set|
|Capacity||1tonn to 25 tonn/hr|
Introduction:-Grain dryer is mainly used to dry raw material with high moisture such as corn. Mixed flow grain dryer can be widely used to dry various grains and oilseed, such as paddy, wheat, corn, sorghum, soybean, rapeseed.
Concurrent flow grain dryer adopts concurrent drying and counter flow cooling technology. Mixed flow grain dryer adopts mixed-flow drying technology.
These two types can all be widely applied in grain depot, grain and feed processing plant,
Corn and paddy with high moisture
Mixed flow grain dryer:
Rice, wheat, corn, sorghum, soybean, rapeseed, etc.
2. fuel (All types ):-
Our Specially Designed Grain Dryer Re-use 50% of its energy, therefore we save 50% of operation cost than other’s grain dryer.
Fully weather proof, can be installed and used in open air.
Mechanized and continuous operation, results in a stable and easy operation.
Be adaptable to various grains.
Dried grain can be immediately transferred to grain stores due to appropriate and even drying, enough tempering and cooling.
Free from pollution, quality of grain can be maintained.